Introduction To Cnc Stamping Processing Standards

Last Updated on September 20, 2023 by assistant

Here is CNC Stamping Processing Manufacturer talking about Mechanical parts.

If you have any idea about Aluminum Metal Prototype, welcome to contact us and discuss.

Mechanical parts comprise of a number of surfaces. The comparative connection between the surface of the parts is studied to determine a mention. The mention is the point, line, and surface where the job of the other factors, lines, and faces are determined.

Benchmarks can be divided into style benchmarks and procedure benchmarks based on the different functions of the grade.


1. Design basis: A reference used on a part drawing to determine the position of other points, lines, and faces is called a design basis.

2. Process Benchmark: The grade used by components during processing and assembly is known as the process baseline. Process benchmarks are broken up into assembly benchmarks, dimension benchmarks, and placement benchmarks depending on the application.

(1) Assembly basis: A reference used in assembly to determine the position of a part in a part or product, called an assembly basis.

(2) Measurement reference: A reference used to check the size and position of a machined surface, called the measurement reference.

(3) Positioning mention: The benchmark used for workpiece placement during machining is known as the positioning benchmark. Since the surface (or line, stage ) of this placement reference, just the blank surface could be chosen in numerous procedures. This positioning surface is known as the rough mention. The surface may be utilized as the placement reference in the following procedures. This positioning surface is known as the nice reference.

At the same time,  CNC Brass Prototype can be offered for you. Looking forward to receiving your inquiry.

Introduction To Cnc Stamping Processing Standards